Lithium Battery Acupuncture Extrusion Test Machine Explosion-Proof Thermal Shock Battery Testing Equipment

• Customization: Available
• After-sales Service: Online Services and Localization Services
• Warranty: One Year
• Model NO.: XB-OTS-B010
• Type: Batteries Monomer Tester
• Test Region: Current
• Application: Lithium-ion Battery
• Customized: Customized
• Flame Hight: 10~ 75mm
• Test Hole Diameter: 102mm
• Certificate: CE ISO
• Power: 1kw
• Weight: 100kg
• Power Supply: AC220V
• Transport Package: Standard Strong Wood Case
• Specification: 700*560*680 mm
• Trademark: OTS
• Origin: Guangdong, China (Mainland)
• HS Code: 9031809090
• Production Capacity: 248 Sets Per Month
• Package Size: 74.00cm * 60.00cm * 190.00cm
• Package Gross Weight: 100.000kg

Product Description

Product Description

Product Description

This machine simulates the squeezing and puncturing of various types of batteries during use, transportation, storage or disposal of household waste. It uses touch screen control and can get results immediately.

The test only squeezes the battery once, and it is qualified if there is no explosion or file.

Test Standard of Battery extrusion needle testing machine

1. GB 31241-2014 Safety Requirements for Lithium-ion batteries and battery Packs for Portable electronic Products

2. UL 1642:2012 Lithium Battery Standard

3. UL 2054:2012 Household and Commercial Battery Packs

4. IEC 62281:2004 Lithium Primary Batteries and Storage Batteries in Transport Safety Requirements

5. IEC 60086:2007 Primary Batteries – Part 4 Safety Requirements for Lithium Batteries

Testing requirements

The test should be carried out at an ambient temperature of 20℃±5℃. Place the fully charged battery on two planes, and the extrusion pressure is 13KN±0.78KN, perpendicular to the direction of the plate. Once the pressure reaches the maximum, the extrusion test can be stopped. During the test, the battery is qualified if there is no external short circuit, explosion, or fire.

1.For cylindrical batteries, the longitudinal axis of the extruded battery should be parallel to the two plates of the extrusion device.
2.Only the wide side of the battery is squeezed for square and soft-pack batteries.
3.For button batteries, the upper and lower planes of the battery are parallel to the flat plate during the extrusion test.
4.High-temperature resistant steel needle, steel needle (needle tip angle 45°~60°, smooth needle surface, no rust, oxide layer, and oil stains), penetrate at a speed of (25±5) mm/s from the direction perpendicular to the battery plate. The penetration position should be close to the geometric center of the punctured surface. The steel needle stays in the battery and observes for 1 hour.

Product Paramenters

Inner box size	520x450x560mm WDH
Machine size	800x700x1730mmWDH
Inner chamber material	SUS201 stainless steel plate, thickness 1.2mm and coated with Teflon;
The outer box material	1.5mm thick cold-rolled steel plate baking paint treatment;
Observation window	250x250mm,Two-layer tempered glass, transparent window is equipped with stainless steel mesh;
Smoke outlet	diameter of 100mm, located at the back of the machine;
Pressure relief port	The opening size is 200x200mm and is located at the back of the chamber. When the sample explodes, the pressure relief will be released;
Lighting device	easy to observe the state of the tested sample;
Drive mode	servo motor drive
Control mode	touch screen control
Pressure range	1-20kN
Pressure display accuracy	0.1N
Sensor resolution	1/1000;
Unit conversion	kg, N, lb
Test maximum battery size	200x200x200mm WHD
Extrusion stroke	250mm
Speed	1-40mm/s adjustable
Holding time	0-99H99(H/M/S can be arbitrarily set)
Extrusion head	standard flat plate extrusion head, area ≥20cm²
Extrusion degree	extrusion pressure up to 13±0.0.78kN;
Sample clamping method	manual clamping, fixture to meet the button type, cylindrical, square battery
Weight	100kg
Power supply	AC220V
Power	1KW

Advantage

Customer Support Services

Ø 24 hours online
Ø 35 years experiences
Ø Sample chamber of each model
Ø Best price, fast delivery
Ø OEM,ODM
Ø Oversea offices
Ø Own import and export business license
ØISO,CE,UL,ASTM,DIN,EN,GB,BS,JIS,ANSI,TAPPI,AATCC,IEC,VDE

Ø Installation
Ø Training (Training customer employees)
Ø Calibration
Ø Preventative maintenance
Ø Replacement parts
Ø Assistance via phone or internet
Ø On-site diagnosis and repair/online diagnosis and repair

Details Images

Product packaging

Company Profile