Customization: | Available |
---|---|
After-sales Service: | 1 Year |
Power Supply: | 220V |
Still deciding? Get samples of $ !
Order Sample
|
Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
---|
Payment Methods: |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
---|---|
Support payments in USD |
Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
---|
Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
---|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Model
|
XB-OTS--150V-A
|
XB-OTS--384V-A
|
XB-OTS--800V-A
|
Water Tank Size
|
200L with stirrer, size can be customized
|
||
Inner Size WDH
|
60*50*50cm
|
80*60*80cm
|
100*80*100cm
|
External Size WDH
|
160*220*150cm
|
180*240*180cm
|
200*285*180cm
|
Application field
|
Auto parts and other electronic and electrical products.
|
||
Temperature Range
|
RT+10ºC~150ºC
|
||
Test Medium Display Accuracy
|
0.01ºC
|
||
Test Medium Stability
|
<=±2ºC
|
||
Test Liquid Medium
|
Deionized water or+3% Arizona fine dust
|
||
Water Temperature Range
|
(0~+4)ºC
|
||
Water Temp Stability
|
<=±0.5ºC
|
||
Water Temp Fluctuation
|
<=±2ºC
|
||
Heating Rate
|
RT+10ºC~150ºC≤45min
|
||
Cooling Rate
|
25ºC~2ºC≤60min
|
||
Number Of Orifices
|
1 slit nozzle;
|
||
Orifice Position
|
Right side of inner chamber
|
||
Distance Between Nozzle And Sample
|
325 ± 25mm (adjustable manually)
|
||
Injection Time Per Cycle (30min)
|
3S, interval time: interval time: 29m57s (touch screen setting)
|
||
Number Of Cycles
|
100 times (touch screen setting)
|
||
Water Spray Flow
|
(3~4)L/3S
|
||
Power Supply
|
3phase 380V 50Hz or customized
|
||
Power
|
12.0KW
|
||
Safety Protection Function
|
Leakage protection, water shortage protection, short circuit protection, phase sequence protection, thermal overload protection
|
||
Accessories
|
1. One copy of operation manual;
2. One copy of factory certificate; 3. One copy of equipment warranty card; 4. Water pipe 6m (1 piece) |
||
Use Conditions
|
The user guarantees the following conditions and completes the corresponding connection
|
||
Use Site
|
1. The ground is flat, the drainage is smooth, the ground and wall are waterproof, and the floor drain or drainage ditch is set;
2 The ground bearing capacity shall not be less than 200kg/m2; 3. The site is well ventilated; 4. No strong vibration around the equipment 5. There is no strong electromagnetic field around the equipment; 6. There are no flammable, explosive, corrosive substances and dust around the equipment; 7. Proper use and maintenance space shall be reserved around the equipment: rear side, left and right sides, top: 800mm; Front side of equipment: 1500mm. |
||
Environment Condition
|
Temperature:5ºC~35ºC
Humidity:≤85% Are pressure:86kPa~106kPa |
||
Grounding resistance of protective ground wire
|
The grounding resistance of protective ground wire is less than 4 Ω
|
||
power switch
|
1. Users are required to configure leakage protection air switch with corresponding capacity for the equipment at the installation
site, and the switch must be used independently for the equipment 2. Do not use knife switch or power socket 3. The position of leakage protection air switch not more than 2m away from the equipment |
||
Water source conditions
|
1. The user is required to provide water for the equipment at the installation site, with the water pressure not less than 0.2Mpa,
and install a four tap. 2. The water tap shall not be more than 2m away from the equipment |