Mfi Auto Melt Flow Index Testing Machine for Plastic

• Customization: Available
• Mass Scope of Workpiece: <900kg
• Type: Material Testing Machine
• Maxcapacity: <1000KN
• Accuracy Grade: 0.5
• Load Way: Mechanical Load
• Loading Method: Dynamic Load
• Display: Digital
• Control: Manual Control
• Weight: 100-500Kg
• Power Source: AC220V
• Temperature Range: Rt~+450c
• Standard Test Load: 0.325kg, 1.Kg, 2.1kg, 3.Kg, 5.Kg, 10.0kg, 12.Kg, 2
• Cut Material Way: One Hand Automatic Cut Material
• Power Supply: AC220V, 50Hz
• Times of Cutting: 0~10 Times
• Transport Package: Standard Strong Wood Case
• Specification: 700*600*1400mm
• Trademark: OTS
• Origin: Guangdong, China (Mainland)
• HS Code: 9024109000
• Production Capacity: 248 Sets Per Month

Product Description

 

Plastic Melt Flow Indexer Machine, Melt Flow Rate tester

 

 

Introduction

Melt Flow Index MFI Testing Machine is used to determine melt-mass flow rate (MFR). It is applicable not only to the higher melting temperature, such as polycarbonate, nylon, fluoroplastics, poly oxide and other engineering plastics, and it also applies to plastic measurement of melt lower temperature, such as polyethylene, polystyrene, polypropylene, ABS resin, poly formaldehyde resin. At the same time, it is widely used in plastics raw materials products, the petrochemical industry and related universities, scientific research institutes, and commodity inspection departments.

Application

Plastic, resin is used for mensurating melt flow rate when the viscous flow state MFR value, it applies to the polycarbonate, higher temperature of aromatic sulfone, nylon engineering plastics, can also be applied to polyethylene (PE), polystyrene (PS), polypropylene (PP), ABS resin, polyformaldehyde (POM), polycarbonate (PC) resin with lower melting temperature, such as plastic test, widely used in plastic production, plastic products, such as petroleum and chemical industry and related colleges and universities, scientific research units, and the commodity inspection department.Melt Flow rate instrument is suitable for the Designation: D 1238-04 Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer1 "in the Standard of regulation of Thermoplastics Melt mass Flow rate measurement, equivalent adopted of this Standard, and can meet the ISO 1133:Standard test for determination of mass flow velocity of thermoplastic melts.The melt flow rate meter is a desk-top structure with reasonable design, stable and reliable performance, beautiful appearance and convenient operation.

Product features

1. 4.3TFT color screen touch operation control
2. PID dual zone temperature control, heating speed, high constant temperature precision
3. After packing, can quickly restore the constant temperature state
4. The time is accurate to 0.1s
5. Automatic and manual cutting test method can be adopted
6. Equipped with a printer to automatically print out the test results

 

Model	XB-OTS-MFIT
Barrel parameters	Inner hole 9.550±0.005mm
Pistons parameters	Piston head:  9.474±0.005mm
Outlet length	8.000±0.025mm
Paramters	Extrusion hole 1=2.095±0.005mm
Temperature parameter	With intelligent temperature control instrument, with four pairs of significant temperature setting control, PID parameters can be automatically set, precision up to ± 0.1 degree centigrade
Temperature range	Room Temperature~450degree centigrade
Temperature fluctuation	±0.2 ºC
Temperature uniformity	±1ºC
Temperature display resolution	0.1ºC
Display resolution	0.1ºC
Maximum comsuption	< 600W
Time display resolution	0.1s
Weight parameters are as follows:
Weight accuracy	±0.5%
Basic configuration	A    0.325kg
	B    1.2kg
	C    2.16kg
	D    3.8kg
	E     5kg
	F     10kg
	G    12.5kg
	H     21.6kg
Position detection
Loop distance from up and down	30mm
Control precision	± 0.1mm
Test flow control
Times of cutting the material	0~10 times
Material cutting interval	0~999s(set reference Table 2)
Control flow reaches the set temperature without volatility
Barrel temperature time	15 min.
Material be installed	1 min.
Material sample temperature recovery time	4 min.
When binder set	1min
Output mode	Micro-automatic print output
Cut material methods	The hand automatic cut into one body
Test load	Eight sets of weights
Power	AC220V±10%   50/60HZ

 

Package :

1.Strong standard wood case, inner plastic films wrapped for ECT Edge Crush Tester   
 
2. Usually we delivery the equipment by air,by sea or by express. it depends on customer Company Advantage

Ø 24 hours online
Ø 35 years experiences
Ø Sample chamber of each model
Ø Best price, fast delivery
Ø OEM,ODM
Ø Oversea offices
Ø Own import and export business license
Ø  ISO,CE,UL,ASTM,DIN,EN,GB,BS,JIS,ANSI,TAPPI,AATCC,IEC,VDECustomer Support Services
Ø Installation
Ø Training (Training customer employees)
Ø Calibration
Ø Preventative maintenance
Ø Replacement parts
Ø Assistance via phone or internet
Ø On-site diagnosis and repair/online diagnosis and repair

FAQ
 

1. How to choose the most suitable fitness equipment steel tensile testing machine?

 Our professional team will give you the best suggestion as long as you tell us what kind of test you need to do 
 and the required specification.

2. What's the delivery term?

 At most of time, we have stock in the factory. If there is no stock, normally, the delivery time is 15-20 working 
 days after deposit receipt. If you are in urgent need, we can consider making special arrangement for you.

3. Do you accept customization service?

 Yes, of course, we can not only offer standard machines, but also customized machines according to your 
 request. Don't hesitate to tell us your requirement, we will try our best to meet your needs.

4. Can we visit your factory before order?

 Yes, we warmly welcome and sincerely invite you or your team to visit our factory, we will help to arrange 
 hotel and pick up you from airport.

5. Do you have customers of our country before?

 Now our testing machines have been sold to more than 26 countries, like USA, Canada, Russia,UK, Italy, 
 Germany, European Union, India, Pakistan, Philippines, Singapore, Thailand and Vietnam, Iran, Brazil...and so 
 on.

6. How about your warranty?

 Generally, our warranty is one year. Within the warranty period, we can offer technique support and part parts 
 change, necessarily, our engineers may go to your place for better service.

7. How about the packing for machine, is it safely protected during transportation?

 Our machine is packed by standard export wooden box, it won't be damaged. We've delivered many testing 
 machines abroad by sea or by air without damage.

8. What is the order process?

 Inquiry - quotation - communication - order confirming - deposit payment - production - testing and debugging 
 - balance payment - packing - delivery - customer receiving - after service. 

9. How to install and use the product?

 The product is shipped with an operating instructions and video of English version.

If you want to know more information...
Please leave a message below and click " SEND "
Thanks for your time and attention~Thank you!