Test of Rain and Storm Simulation Rain Test Chamber
Introduction:
The Rain Test Chambers are designed for the simulation of rain / water spray with features like fully non-corrosive interior and exterior. Characteristic water flow patterns as per IPX1 - IPX8 and R1, R2, S1 & S2 standards.
Features:
Exterior with non-corrosive FRP (Fiber Reinforced Plastic).Interior with non-corrosive FRP (Fiber Reinforced Plastic) / stainless steel.Large capacity (100 Ltrs) water reservoir with automatic water refilling facility.Rotating test table to expose the specimen for spray from all sides.Rotating spray and rain nozzle arms are designed for JIS specification.The chamber is also designed for multiple tests as per different standardsDesigned for re-circulation of water for continuous tests.Required pressure regulators, flow meters & gauges for pressure and flow control of sprays.
Meeting Standard:
IEC60529, IEC60598, IEC60335, IEC 60034-5:2000
IPX5, IPX6 original nozzle with an angle adjustable device.
2. Model:XB-OTS-IPX56
3. Uses:
Waterproof test system is according to IEC60529, IEC60598, IEC60335 and IEC 60034-5:2000. The IP-X includes the following test grades: IPX1, IPX2, IPX3, IPX4, IPX5, IPX6, IPX7 and IPX8 (Refer to page 51 of IEC60529). It is widely used in the authentication test organization for the products such as electrical & electronic products such as LED luminaires as well as in the relevant quality control department for the waterproof detection of the enclosures protection grades.
4. the device consists of: respectively, by laboratory test bed, water tank, control box, product dehydration buffer, turntable, and sprinkler system.
- The main technical parameters:
| Inner size |
1000 × 1000mm ×1000mm(L*W*H) |
| The sprinkler system: |
water pump, pressure gauge, stationary nozzle holder, |
Nozzle Installation |
Installed above the two nozzle heads. one piece IPX5 nozzle and one piece of IP6 spray nozzle.
10-120 ° angle adjustable |
| Diameter |
six points |
| The inner diameter of orifice |
1 ~ φ6.3mm, IP5 (grade), 2 ~ φ12.5mm, IP6 (grade) |
| Water pressure |
100 ~ 150kpa (by flow regulator) |
| Spray flow |
IP5 (grade) 12.5 ± 1 (L / min),
IP6 (grade) 100 ± 5 (L / min) |
| The turntable |
φ500MM speed: 3 ± 1R / min |
| Water Duration |
3,10,30,9999min (adjustable) |
| Recycling |
water circulation system to ensure water recycling |
| By the water |
the top surface of the product |
| Water pressure |
water pressure gauge, water pressure can be displayed |
| Support |
as a test of tempered glass box outdoor waterproof wall, stainless steel square pass as a stent. |
| The control system |
Longhorn company developed touch-screen control system. |
6. The structural principle:
The basic principles of the design of the device: a water tank located at the bottom right side of the control box by internal stainless steel pumps and pumping pressurized and then sent to the upper nozzle, spray nozzle perpendicular to the turntable on top of the sample, and then scattered the inside of the tank, thereby forming a water circulation system. Pump outlet design flow meters, pressure gauges, solenoid valves and other control components. Waterproof inner tank mounting speed dial on the control panel.
- Construction Material:
1, nozzle: stainless steel tube
2, water tank: SUS#304
3, sealing plate material: Just lower glass 5MM thick glass top PC plastic transparent plate .
4, frame material: 304 stainless steel square pass, sand surface,
IP56 water jet ways: sequentially spray, spray from the first to the last, and then from the last spray has been circulating since the test time to stop. Water flow can be observed.
- Safety devices:
1.Power overload, short-circuit protection
2.Ground protection
3.Water protection
4.Prompt information ring the alarm
XB-OTS-IPX34
The main technical parameters
| Model |
XB-OTS-800P |
XB-OTS-1000P |
| Internal Dim.W×H×D(mm) |
800×800×800 |
1000×1000×1000 |
| External Dim.W×H×D(mm) |
1250×1800×1100 |
1750×1850×1300 |
| Water Temp. |
Normal |
Normal |
| Spray Type |
Total Water
Flow
(L/min) |
R1 |
1.8 |
IP×1 |
With in 1~1.5mm/min(In drip box) |
| R2 |
3.2 |
IP×2 |
With in 3~3.5mm/min(In drip box) |
| S1 |
24.5 |
IP×3 |
angle±600,R:400mm,1.1L/min |
| S2 |
39.2 |
IP×4 |
angle±1800,R:400mm,1.8L/min |
Pressure of
spray nozzle
(kgf/cm*2) |
R1 |
0.1 |
1.Flow rate of the water=0.07L/min |
| 2.1P×3,Radius:400mm,16Number or open |
| holes=16,total water flow:1:1L/min. |
| R2 |
0.3 |
3.1P×4,Radius:400mm,25Number or open |
| S1 |
1 |
holes=25,total water flow:1:8L/min. |
| S2 |
3 |
*Radius:200mm,R400mm. |
| (For 1P×3,1P×4 only) |
| (RPM)Test Specimen Frame |
17RMP |
1RPM |
| Spray Nozzle Rotation Speed |
23RPM |
Promote the pipe on both sides of the vertical line of 30 °
each time back and forth about four seconds to promote |
| Swing 60 ° from vertical for 4 seconds at one time |
Promote the pipe on both sides of the vertical line of 180 °
for about 12 seconds to promote one round |
| Swing 180 ° from vertical for 12 seconds at one time |
| |
| |
| Material |
Interior |
SUS#304 |
| Exterior |
| Other Components |
Chamber lamp.Wiper |
Chamber lamp.Wiper,casters with Adjusters |
| casters with Adjusters |
| Power Source(K.W.) |
AC 1Ψ 220V 60/50Hz 4KW |
Use:
Waterproof test system is according to IEC60529, IEC60598, IEC60335 and IEC 60034-5:2000. The IP-X includes the following test grades: IPX1, IPX2, IPX3, IPX4, IPX5, IPX6, IPX7 and IPX8 (Refer to page 51 of IEC60529). It is widely used in the authentication test organization for the products such as electrical & electronic products such as LED luminaires as well as in the relevant quality control department for the waterproof detection of the enclosures protection grades.
Ø 24 hours online
Ø 35 years experiences
Ø Sample chamber of each model
Ø Best price, fast delivery
Ø OEM,ODM
Ø Oversea offices
Ø Own import and export business license
ØISO,CE,UL,ASTM,DIN,EN,GB,BS,JIS,ANSI,TAPPI,AATCC,IEC,VDE
Customer Support Services
Ø Installation
Ø Training (Training customer employees)
Ø Calibration
Ø Preventative maintenance
Ø Replacement parts
Ø Assistance via phone or internet
Ø On-site diagnosis and repair/online diagnosis and repair
Company Profile
Dongguan Xinbao Instrument Co., Ltd, with its own brand--OTS, has been dedicating in providing professional testing equipment with top quality since its establishment in 1978. It owns sophisticated and advanced technology in producing environmental test chambers and mechanical test machines like temp humidity chamber, thermal shock test chambers, rain and dust test chambers, salt spray chambers ,walk in /drive in test chambers, tensile testing machine, vibration test machine, other customized test chambers and so on. Products made by OTS reach international standards: ISO, ASTM, DIN, EN, GB, BS, JIS, AMSI, UL, TAPPI, AATCC, IEC. Also they are widely used in different area: R&D Institutions, Quality inspection institutions, universities,electronics, communications, instrumentation, automobile, plastic, metal, building materials, aviation, etc.
Now OTS has its main production base in Dongguan, a branch in Suzhou and offices in South Asia, Europe, USA. OTS also owns an independent laboratory which exhibits all currently produced machines under CNAS calibration, so customers can check the function and quality immediately. Equipped with over 30 workers in a metal plate department, OTS is capable to produce customized shells; What's more, OTS has enough stock to satisfy customers need in time. In the meanwhile, every machine must be examined for 3~days before shipment and with lifetime maintenance service.
1.Do you offer after-sales service? How can I ask for that? And how about the warranty?
Every machine from our factory has a 14-month warranty after shipment. Generally, we offer 12 months for the FREE maintenance, while considering of sea transportation, we can extend 2 months for our customers. If your machine doesn't work, you can send E-mail to us and we will try our best to find the problem by email or skype video chat if neccesary. After confirmation of the problem, we can send you new spare parts or provide on-site repair.
2.What's the delivery term?
At most of time, we have stock in the factory. If there is no stock, normally, the delivery time is 15-20 working days after deposit receipt. If you are in urgent need, we can consider making a special arrangement for you.
3.Do you accept customization service? Can I have my logo on the machine?
Yes, of course. We can not only offer standard machines, but also customized machines according to your requirements. And we can also put your logo on the machine.
4.How to install and use the product?
We will send you operating instructions, English video by Email. Or you can download on our officail website directly. Most of our machine is shipped with a whole part, which means it is already installed, all you need to do is to connect the power cable and start to use. And if possible, we can also install your machine at site.
If you want to know more information...
Please leave a message below and click " SEND "
Thanks for your time and attention~Thank you!
){kind=link}