For reference
Introduction
The computer-controlled torsion testing machine is composed of a loading system, a transmission system, a digital data acquisition and processing system, and a computer measurement and control display system. It is suitable for metal materials, non-metal materials and various parts such as shafts, couplings, springs, etc. Performance test of static torsion mechanics of gears, bimetal materials, and joints. The machine adopts horizontal structure, computer control and screen display, FTS precision inspection and test system, and full digital AC control system. It has the characteristics of uniform loading, stability, no impact, and accurate data acquisition and control.
The function:
WindowsXP Chinese operating platform can detect the torque, torsion angle, and torsion strength of materials. Using a window operating system with graphics as the interface, the display screen and operation panel can be set; the test speed and various control parameters can be set; the basic test results can be displayed in real time; the graphics of various related parameters of the test process can be displayed in real time; Realize system diagnosis and display the diagnosis result.
This testing machine complies with the relevant data processing requirements of JB/T9370-2007 "Technical Conditions for Torsion Testing Machines" and GB10128-2007 "Metallic Materials Room Temperature Torsion Testing Methods".
Users can also provide relevant technical standards, and realize the control of test methods and related data collection and processing in accordance with the standards provided by users, such as GB, ASTM, DIN, JIS, EN, etc.
Structure:
- Main machine:
It adopts horizontal structure, and the main structure adopts frame structure to ensure the rigidity of the whole machine. The installation and disassembly of the sample is convenient and fast.
- Drive system:
Driven by a fully digital control system, wide speed adjustment range, uniform and stable loading.
- Transmission system:
adopts worm gear transmission to ensure the uniformity, stability and transmission accuracy of transmission, and it can be adjusted manually within the range of lateral space.
4.Torque and twist angle test.
Equipped with high precision sensor, the torque can be tested in 2 directions. The torsion angle is detected by photoelectric encoder on the output axis to ensure that the displayed value is accurate. Through the computer data acquisition and processing system, the sensor, encoder signal processing on the computer screen display
5.Measurement and display system:
The machine uses a photoelectric encoder to collect the torsion angle of the sample, a high-precision torque sensor collects the torque of the sample, and a high-precision rotary encoder measures the torsional deformation of the sample. The computer screen displays the torque, torsion angle, torsion deformation and various curves of the sample.
6.Safety protection device:
10% overload protection, over current, over voltage, over speed protection and emergency stop protection
7.Software operation:
a.The control mode adopts the intelligent expert setting system, and the user can compile the test process control method according to their actual requirements, and automatically complete the test.
b,WindowsXP all Chinese interface, man-machine dialogue mode. The computer screen displays the test torque, torsion angle, various test curves (torque-time curve, torque-angle curve, angle-time curve, etc.) testing machine working status, etc.
c,The size of the curve coordinates can be adjusted according to the actual test data.
d,Output and print various test report formats (the report format can be output in Excel or Word format).
e,Comply with the relevant data processing requirements of JB/T9370-2007 "Technical Conditions for Torsion Testing Machines" and GB10128-2007 "Metallic Materials Room Temperature Torsion Test Methods".
f,The torque, maximum torque, and torsional strength of the test piece can be tested. Torque and torsion angle are automatically tracked and measured, and the test curve, torque value, torsion angle, and torsion speed are displayed. After the test, the test data is processed automatically, and the performance parameters such as the torque and torsion strength of the material can be automatically obtained; the report format can be freely prepared according to the user's requirements and the test report can be output and printed.
g,The test process can be simulated and reproduced.
h,Digital zero adjustment and calibration can be carried out, and any number of test curves can be superimposed and compared, output and printed.
i,The test data adopts database management mode, which is convenient for query and maintenance.
j,The operation of the software system can realize three-level user management, which is safe, convenient and fast
8.Different test plans can be established according to the requirements, and batch test can be carried out. The data is collected in real time during the test, the curve is drawn in real time, and the large database is used for data storage, which facilitates user resource sharing and reanalysis. After the test is completed, the data is automatically processed and saved. The test results can be viewed at any time and the test report can be printed. The test report format can be changed according to the different requirements of the user. The test machine's processing of the test data is in full compliance with the standards of the spring test machine.
9.Test method:
There are two kinds of test methods: manual test and program control test. The details are as follows:
a) A manual test can select a test speed, and then select the test stop condition. The test stop conditions include: the angle is reached, the twist angle is reached, and the torque is achieved in three ways.
b) During the program control test, the speed conversion can be realized. No manual intervention is required during the test, and the test machine automatically runs according to the prepared test conditions.
10.Material performance data is automatically processed based on the measured material curve. For the curve with obvious yield, the upper and lower torsional yield strength can be automatically determined; for the torque-torsion curve, the shear modulus can be automatically selected. For materials without obvious yielding, automatically choose to calculate the specified non-proportional torsional strength;
11.Set the test speed by yourself and stop automatically after the test is completed.
12.
With overload automatic stop function.
13.The manual micro-feeding device can be configured to realize the micro-feeding under various load conditions, which is convenient for calibration and displacement fine adjustment.
- The test results are automatically stored, and the test report is printed as needed. The report format can be changed according to user requirements.
- Software Calibration Section
a) Force value calibration: The method of three-point calibration is used to make the test force value more accurate and higher precision.
b) Electronic torsion meter calibration: The calibration method of the electronic torsion meter is the same as the calibration method of the force value, which ensures the accuracy of the torsion angle.
Specifications:
| Max Torque |
1000Nm |
| Test machine accuracy |
Level 1 |
| Torque effective measurement range |
1%-100%FS of full scale |
| Minimum read value of torque |
0.01nm |
| Test torque resolution |
1/±300000 |
| Torque indication relative error |
≤±1.0% (two directions: forward rotation and reverse) |
| Torque repeatability relative error |
≤1.0% (two directions: forward rotation and reverse) |
| Angle measurement range |
0-10000° |
| Relative error of Angle indication |
≤±1.0% (two directions: forward rotation and reverse) |
| Deviation of Torque Angle |
≤±1% |
| Min. Resolution of Torque Angle |
0.01° |
| Minimum read value of Angle |
0.01° |
| Distance between grips |
0~500mm Adjustable |
| Max diameter of the Sample |
φ150mm |
| Torque Speed |
0-720° stepless speed regulation |
| Relative error of torsional velocity indication |
≤±1% (two directions: positive rotation and reverse) |
| Torsional velocity indicates repeatability error |
≤1.0% |
| Machine size |
1200*500*1500mm. |
| Test Direction |
Double directions |
| Power |
220VAC±10%,50Hz (Optional),1000W |
| Control |
computer Servo closed Loop Control |
| Overload Protection |
Yes |
| Weight |
790kg |
1.Strong standard wood case, inner plastic films wrapped for Vibration Testing Machine
2. Usually we delivery the equipment by air,by sea or by express. it depends on customer
Ø 24 hours online
Ø 35 years experiences
Ø Sample chamber of each model
Ø Best price, fast delivery
Ø OEM,ODM
Ø Oversea offices
Ø Own import and export business license
ØISO,CE,UL,ASTM,DIN,EN,GB,BS,JIS,ANSI,TAPPI,AATCC,IEC,VDE
Customer Support Services
Ø Installation
Ø Training (Training customer employees)
Ø Calibration
Ø Preventative maintenance
Ø Replacement parts
Ø Assistance via phone or internet
Ø On-site diagnosis and repair/online diagnosis and repair
Company Profile
Dongguan Xinbao Instrument Co., Ltd, with its own brand--OTS, has been dedicating in providing professional testing equipment with top quality since its establishment in 1978. It owns sophisticated and advanced technology in producing environmental test chambers and mechanical test machines like temp humidity chamber, thermal shock test chambers, rain and dust test chambers, salt spray chambers ,walk in /drive in test chambers, tensile testing machine, vibration test machine, other customized test chambers and so on. Products made by OTS reach international standards: ISO, ASTM, DIN, EN, GB, BS, JIS, AMSI, UL, TAPPI, AATCC, IEC. Also they are widely used in different area: R&D Institutions, Quality inspection institutions, universities,electronics, communications, instrumentation, automobile, plastic, metal, building materials, aviation, etc.
Now OTS has its main production base in Dongguan, a branch in Suzhou and offices in South Asia, Europe, USA. OTS also owns an independent laboratory which exhibits all currently produced machines under CNAS calibration, so customers can check the function and quality immediately. Equipped with over 30 workers in a metal plate department, OTS is capable to produce customized shells; What's more, OTS has enough stock to satisfy customers need in time. In the meanwhile, every machine must be examined for 3~days before shipment and with lifetime maintenance service.
1.Do you offer after-sales service? How can I ask for that? And how about the warranty?
Every machine from our factory has a 14-month warranty after shipment. Generally, we offer 12 months for the FREE maintenance, while considering of sea transportation, we can extend 2 months for our customers. If your machine doesn't work, you can send E-mail to us and we will try our best to find the problem by email or skype video chat if neccesary. After confirmation of the problem, we can send you new spare parts or provide on-site repair.
2.What's the delivery term?
At most of time, we have stock in the factory. If there is no stock, normally, the delivery time is 15-20 working days after deposit receipt. If you are in urgent need, we can consider making a special arrangement for you.
3.Do you accept customization service? Can I have my logo on the machine?
Yes, of course. We can not only offer standard machines, but also customized machines according to your requirements. And we can also put your logo on the machine.
4.How to install and use the product?
We will send you operating instructions, English video by Email. Or you can download on our officail website directly. Most of our machine is shipped with a whole part, which means it is already installed, all you need to do is to connect the power cable and start to use. And if possible, we can also install your machine at site.
If you want to know more information...
Please leave a message below and click " SEND "
Thanks for your time and attention~Thank you!
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}