1C Temp Uniformity programmable Humidity Control Thermal Cycling Chamber
Introduction:
Test material heat, cold, dry resistance, humidity resistance.Suitable for electronics, electrical appliances,Communications, instrumentation, vehicles, plastic products, metal, food, chemical,building materials, medical, aerospaceand other products.
Specification:
Model |
XB-OTS-80 |
XB-OTS-150 |
XB-OTS-225 |
XB-OTS-408 |
XB-OTS-800 |
XB-OTS-1000 |
Inner size
W*H*DCM |
40*50*40 |
50*60*50 |
50*75*60 |
60*85*80 |
100*100*800 |
100*100*100 |
External size W*H*DCM |
90*143*100 |
100*153*110 |
110*168*110 |
130*178*120 |
150*193*140 |
150*193*160 |
Temperature range |
-70°C~+150°C(180°C)
(A:-20°C B:-40°C C:-60°C D:-70°C ) |
Humidity range |
20%~98%R.H.(10%-98%R.H/5%~98%R.H) |
Temp humidity
analytic accuracy
/ uniformity |
±0.1°C;±0.1%R.H./ ±1.0°C;±3.0%R.H.is special optional condition. |
Temperature humidity
control accuracy/fluctuation |
±1.0°C;±2.0%R.H./ ±0.5°C;±2.0%R.H. |
Heat/cooling time |
About 5.0°C/min;about 1.2°C/min (5~10°C/min is a special optional condition |
Inner and outer materials |
SUS#304 Stainless steel for inner chamber and Carton Advanced cold plate nano paint for outer. |
Insulation materials |
Resistant to high temp ,high density,formate chlorine,ethyl acetum foam insulation materials |
Cooling system |
Air cooling/single segment compressor(-20°C) ,air and water double segment compressor
(-40°C~-70°C) |
Protection devices |
Fuse switch, compressor overload switch, refrigerant high and low pressure protection switch,
super humidity over-temperature protection switch, fuse, failure warning system |
Parts |
Watching window,50mm testing hole,PL internal bulbs,partition plate,dry and wet ball gauze |
Controller |
TEMI" South Korea"TEMI" "OYO" Japan's "OYO" Brand optional |
Compressor |
Original France"Tecumseh"brand |
Power |
1Φ 220VAC±10% 50/60Hz & 3Φ 380VAC±10% 50/60Hz |
Features:
*.High-texture appearance, the body adopted an arc shape, surface matte stripes processing, and flat-handle, easy to operate, safe and reliable.
*.Rectangular multi-layer glass View window, the use of guinea pigs observed in the test window witt anti-sweat heaters device prevents water gas condensate ,Knot, water droplets, PL fluorescent lamps to keep the inside lighting.
*.Door bunk isolated airtight packing, can be effectively isolated from the internal temperature of the leak
*.With external water supply system, convenient to supplement the cylinder water supply, and automatic recovery using.
*.Compressor cycling system used France"Tecumseh"brand which can effectively remove condenser pipe and between capillary Lubricating oil and whole series adopt environmental protection refrigerant (R23, R404, R507)
*.Controller uses the imported LED display screen, can display measured values and setting time
*.Controller with multisegment program editor and temperature and humidity can be fast (OUICK) or slope (SLOP) controlled.
*.Built-in mobile wheels allow easy movement and placed and has a strong positioning screw position.
Standard:
GB/Bb T2423.2-89 high temperature test method GB2423.1-89 test A: low temperature test method 6
Ab IEC60068-2-1 low temperature test method GJB150.4-1986 test at low temperature
EIA - 364-59 test at low temperature IEC60068-2-38 temperature cycle
IEC60068-2-78 constant temperature IEC60068-2-30 temperature cycle
EIA - 364-31C temp resistance GB/T2423.3 constant heat test method
Our Services:
We are here to help you. Services available:
Replacement manuals
Consumables and replacement parts
On-site maintenance and repair
Warranty support
Over-the-phone service support and advice
If you have an OTS chamber , we will do our best to help you in whatever way we can.
Manuals: PDF files of manuals for current models are available free. Please contact us to request a copy. Older and printed copies at additional charge.
Service repair: We prefer you contact us direct at the factory with any problems you may be experiencing. We help diagnose the problem, arrange for any needed parts, and schedule a technician to do the repairs. Rarely can a local contractor get all that done for you as quickly as we can. We also guarantee the work .
FAQ:
Q1 : Can you customize the product?
A: Yes, we can customize any products according to requirements.Hot selling lab electronic temperature humidity cabinet/Environmental climate test chamber also can be customized.
Q2 : How to choose the most suitable products?
A: Our professional team will give you the best suggestion,just be patiently to tell us the information about the parameters your required.
Q3 : Can you arrange installations and commissioning in our lab?
A: Firstly, for standard chamber we had 3-5 days commissioning before shipping , you just need link power in your lab, then can start to operate
Secondly; we had detailed operation manual with chamber , any problems you can find and solve in it
Thirdly, some of customized chambers we should to install and teach your team to operate .
If you want to know more information...
Please leave a message below and click " SEND "
Thanks for your time and attention~Thank you!