Ess Environmental Thermal Stress Screening Temperature Cycling Test Chamber

• Customization: Available
• Certification: CE, ISO
• Temp. Deviation: +/- 0.5 Degree C
• Model NO.: XB-OTS-225C-B
• Controller: Programmable LCD Touch Screen
• Compressor: Original France Tecumseh
• Waterway Device and Circuit Devices: Separated
• Temp.Fluctuation: +/-3.0 Degree C
• Body Materials: SUS#304 Stainless Steel
• Quality: Certificated
• Cable Port: External Power
• Product Name: Environmental Test Chamber
• Temp. Range: -70 Degree C~+100 Degree C
• Transport Package: Strong Wood Case for Climatic Chamber
• Specification: (W*H*D)60*70*50CM
• Trademark: OTS
• Origin: Guangdong, China (Mainland)
• HS Code: 8479899990
• Production Capacity: 300 Pieces/Month

Product Description

ESS Chamber Rapid Temperature Change Environmental Testing equipment
 

Introduction:

Rapid Rate Change Temperature Test Chamber is widely applied for quality inspection for all types of electric products, electric appliance, and products from communication, instrument, automobile, plastic, metal, food, chemical, building materials, medical and aerospace industries by constant high low temperature change, damp heat etc environment simulation reliability test.

Specification:

Specifications	ESS-OTS
Model	XB-OTS-225C-B	XB-OTS-408C-B	XB-OTS-800C-B	XB-OTS-1000C-B
Working Chamber Volume(L)	225	408	800	1000
TempRateof Change( ºC/Min)	3-20ºC/Min
Performance	-70ºC~+100ºC
	Rapid Temp Change -55ºC~+85ºC Full Linear Control
Humidity	±0.5ºC
Temp	±3.0ºC
Exterior	Cold-rolled steel sheet (Rust proof & Plastic Spray treated ) Stainless Steel
Interior	Stainless Steel Plate(SUS 304)
Insulation	Rigid Polyurethane Foam
Safety	over pressure,over heat and over current protection for compressor,over temp. protection,
Compress	Semi-Hermetic Compressor
Cooling	Water Cooled
Control	Balanced Temperature & Humidity Control System(BTC type)
Heater	Iron-chrome wire heater
Blower	Centrifugal Blower
Observatio	Glass incorporating heat generator
Temp	Pt-100
Controller	Touch screen programmable controller
Ambient	+5ºC~+35ºC
Power	AC 380V/50Hz 3phase 5 wires+ Ground wire
Note: 1. We reserve the right to change specifications without prior notice 2. Customized sizes and configurations available

Features:
1.Reasonable structural design, rapid cooling rate.
2. Imported refrigeration system, internal with SUS#304 high temperature resistant stainless steel.
3. More than 30% energy saving is achieved.
4. The test specimen can be easily observed via observation window,
5. Easy to Operate, install and maintain.
6.ational Construction and fast cooling rate
7.Frequency conversion control of wind speed.
8.Adopts international brand of imported parts for cooling system to improve operation reliability 
9.Touch screen controller, friendly Man-Machine interface and safety device to ensure simple operation and easy maintenance.
10.Standards Implemented and met
11.GB10592-89 Technical requirements for high and low temperature test chamber
12.GB2423.1-1989 Low temperature test
13.GB2423.2-1989 High temperature test mode


Standard:

GB/Bb T2423.2-89 high temperature test method              GB2423.1-89 test A: low temperature test method 6

Ab IEC60068-2-1 low temperature test method                  GJB150.4-1986 test at low temperature

EIA - 364-59 test at low temperature                                   IEC60068-2-38 temperature cycle

IEC60068-2-78 constant   temperature                               IEC60068-2-30   temperature cycle

EIA - 364-31C temp resistance                                           GB/T2423.3 constant  heat test method
The production process of the test chambers :

Our Services:

We are here to help you. Services available:

Replacement manuals

• Consumables and replacement parts
• On-site maintenance and repair
• Warranty support
• Over-the-phone service support and advice

If you have an OTS chamber  , we will do our best to help you in whatever way we can.  

 Manuals: PDF files of manuals for current models are available free. Please contact us to request a copy. Older and printed copies at additional charge.

• Service repair:  We prefer you contact us direct at the factory with any problems you may be experiencing.  We help diagnose the problem, arrange for any needed parts, and schedule a technician to do the repairs.  Rarely can a local contractor get all that done for you as quickly as we can.  We also guarantee the work .

Our Company

 

FAQ:

Q1 :  Can you customize the product?

   A:   Yes, we can customize any products according to requirements.Hot selling lab electronic temperature humidity cabinet/Environmental climate test chamber also can be customized. 

Q2 :  How to choose the most suitable products? 

  A:   Our professional team will give you the best suggestion,just be  patiently to tell us the information about the parameters your required.

 Q3 :  Can you arrange installations and commissioning in our lab?

   A:   Firstly, for standard chamber we had 3-5 days commissioning before shipping , you just need link power in your lab, then can start to operate

        Secondly; we had detailed operation manual with chamber , any problems you can find and solve in it

           Thirdly, some of customized chambers we should to install and teach your team to operate .
 

If you want to know more information,

 please leave a message below. Thank you~