Dongguan Factory Test Equipment High low Temperature Rapid Change Cycling Testing Chamber
Introduction:
Rapid Rate Change Temperature Test Chamber is widely applied for quality inspection for all types of electric products, electric appliance, and products from communication, instrument, automobile, plastic, metal, food, chemical, building materials, medical and aerospace industries by constant high low temperature change, damp heat etc environment simulation reliability test.
Specification:
| Model |
XB-OTS-225C-B |
XB-OTS-408C-B |
XB-OTS-800C-B |
XB-OTS-1000C-B |
| Working Chamber Volume(L) |
225 |
408 |
800 |
1000 |
TempRateof
Change( ºC/Min) |
3-20ºC/Min |
| Performance |
-70ºC~+100ºC |
| Rapid Temp Change -55ºC~+85ºC Full Linear Control |
| Humidity |
±0.5ºC |
| Temp |
±3.0ºC |
| Exterior |
Cold-rolled steel sheet (Rust proof & Plastic Spray treated ) Stainless Steel |
| Interior |
Stainless Steel Plate(SUS 304) |
| Insulation |
Rigid Polyurethane Foam |
| Safety |
Over pressure,over heat and over current protection for compressor,over temp.Protection, |
| Compress |
Semi-Hermetic Compressor |
| Cooling |
Water Cooled |
| Control |
Balanced Temperature & Humidity Control System(BTC type) |
| Heater |
Iron-chrome wire heater |
| Blower |
Centrifugal Blower |
| Observatio |
Glass incorporating heat generator |
| Temp |
Pt-100 |
| Controller |
Touch screen programmable controller |
| Ambient |
+5ºC~+35ºC |
| Power |
AC 380V/50Hz 3phase 5 wires+ Ground wire |
| Note:1.We reserve the right to change specifications without prior notice 2.Customized sizes and configurations available |
Features:
1.Reasonable structural design, rapid cooling rate.
2.Imported refrigeration system, internal with SUS#304 high temperature resistant stainless steel.
3.More than 30% energy saving is achieved.
4.The test specimen can be easily observed via observation window,
5.Easy to Operate, install and maintain.
6.Ational Construction and fast cooling rate
7.Frequency conversion control of wind speed.
8.Adopts international brand of imported parts for cooling system to improve operation reliability
9.Touch screen controller, friendly Man-Machine interface and safety device to ensure simple operation and easy maintenance.
10.Standards Implemented and met
11.GB10592-89 Technical requirements for high and low temperature test chamber
12.GB2423.1-1989 Low temperature test
13.GB2423.2-1989 High temperature test mode
Standard:
GB/Bb T2423.2-89 high temperature test method GB2423.1-89 test A:Low temperature test method 6
Ab IEC60068-2-1 low temperature test method GJB150.4-1986 test at low temperature
EIA - 364-59 test at low temperature IEC60068-2-38 temperature cycle
IEC60068-2-78 constant temperature IEC60068-2-30 temperature cycle
EIA - 364-31C temp resistance GB/T2423.3 constant heat test method
Ø 24 hours online
Ø 35 years experiences
Ø Sample chamber of each model
Ø Best price, fast delivery
Ø OEM,ODM
Ø Oversea offices
Ø Own import and export business license
ØISO,CE,UL,ASTM,DIN,EN,GB,BS,JIS,ANSI,TAPPI,AATCC,IEC,VDE
Customer Support Services
Ø Installation
Ø Training (Training customer employees)
Ø Calibration
Ø Preventative maintenance
Ø Replacement parts
Ø Assistance via phone or internet
Ø On-site diagnosis and repair/online diagnosis and repair
Company Profile
Dongguan Xinbao Instrument Co., Ltd, with its own brand--OTS, has been dedicating in providing professional testing equipment with top quality since its establishment in 1978. It owns sophisticated and advanced technology in producing environmental test chambers and mechanical test machines like temp humidity chamber, thermal shock test chambers, rain and dust test chambers, salt spray chambers ,walk in /drive in test chambers, tensile testing machine, vibration test machine, other customized test chambers and so on. Products made by OTS reach international standards: ISO, ASTM, DIN, EN, GB, BS, JIS, AMSI, UL, TAPPI, AATCC, IEC. Also they are widely used in different area: R&D Institutions, Quality inspection institutions, universities,electronics, communications, instrumentation, automobile, plastic, metal, building materials, aviation, etc.
Now OTS has its main production base in Dongguan, a branch in Suzhou and offices in South Asia, Europe, USA. OTS also owns an independent laboratory which exhibits all currently produced machines under CNAS calibration, so customers can check the function and quality immediately. Equipped with over 30 workers in a metal plate department, OTS is capable to produce customized shells; What's more, OTS has enough stock to satisfy customers need in time. In the meanwhile, every machine must be examined for 3~days before shipment and with lifetime maintenance service.
1.Do you offer after-sales service? How can I ask for that? And how about the warranty?
Every machine from our factory has a 14-month warranty after shipment. Generally, we offer 12 months for the FREE maintenance, while considering of sea transportation, we can extend 2 months for our customers. If your machine doesn't work, you can send E-mail to us and we will try our best to find the problem by email or skype video chat if neccesary. After confirmation of the problem, we can send you new spare parts or provide on-site repair.
2.What's the delivery term?
At most of time, we have stock in the factory. If there is no stock, normally, the delivery time is 15-20 working days after deposit receipt. If you are in urgent need, we can consider making a special arrangement for you.
3.Do you accept customization service? Can I have my logo on the machine?
Yes, of course. We can not only offer standard machines, but also customized machines according to your requirements. And we can also put your logo on the machine.
4.How to install and use the product?
We will send you operating instructions, English video by Email. Or you can download on our officail website directly. Most of our machine is shipped with a whole part, which means it is already installed, all you need to do is to connect the power cable and start to use. And if possible, we can also install your machine at site.
If you want to know more information...
Please leave a message below and click " SEND "
Thanks for your time and attention~Thank you!
){kind=link}