Ce Proved Corrsion Resistance Test Salt Spray Tester

• Customization: Available
• Power Supply: 220V
• Certification: CE, TUV, ISO
• Model NO.: XB-OTS-200
• Accuracy Grade: 0.5
• Load Way: Electronic Load
• Display: Digital
• Weight: 500-1000kg
• Power Source: AC220V
• Test Standard: JIS, ASTM, ISO
• OEM/ODM: Acceptable
• Transport Package: Strong Wooden Case
• Specification: 1440L
• Trademark: OTS
• Origin: China
• HS Code: 9031809090
• Production Capacity: 258 Sets Per Month

Product Description

CE Proved Corrsion Resistance Test Salt Spray Tester

Applicable Industries:

Composite Salt spray chamber is applicable for various kinds material's surface treatment with temperature humidity and salt water spray, such as after coating, electroplate, inorganic and organic membrane dermal, negative pole with antirust oil treatment etc anti-corrosive treatment to test the corrosion-resistance of the product.

Can also be used to external lighting and signal device and vehicle lamps shell protection. Walk in type salt spray test chamber is available for us.

Specifications:

A. test chamber outside the box are made of CPVC polyethylene plates, thickness 10mm.
B. laboratory closures with PVC polyethylene board, thickness 5mm/8mm
C. Supplementary reagent bottle with PVC polyethylene board, hidden water table attached
D. humidification fill the tank with PVC polyethylene board, hidden water table attached
E. pressure air tank with SUS304 # stainless steel high pressure barrel insulation best
F. tune greenhouse: SUS304 # stainless steel box with inner and outer box with PVC polyethylene board
G. Insulation material: polyurethane rigid foam plastic
H. automatic lift by cylinder closures
I. adopts SUS304 # stainless steel bottom chassis and removable casters and positioning foot cups
J. transparent viewing window, combined with defogging device, easy to be clearly observed during the test to the test
K. specially designed sealed damper can be switched automatically or temperature and humidity, salt spray test

Model	XB-OTS-90	XB-OTS-120		XB-OTS-160	XB-OTS-200
Interior Test Chamber  Dimension(cm)(L×W×H)	90×50×60	120×80×50		160×100×50	200×100×50
Exterior Test Chamber Dimension (cm)(L×W×H)	141*145*140	190*165*140		200*190*140	240*220*150
Capacity of the chamber(L)	270L	480L		800L	1440L
Capacity of the salt water tank (L)	25L	40L
Power	AC 220V 50HZ		AC 380V 50HZ
temperature&humidity  of the operating environment	+5°C~ +35°C / <85%RH
air pressure	86~ 106Kpa
Lab. temperature	NSS ACSS           35°C±1°C
	CASS              50°C±1°C
Pressure barrel temperature	NSS ACSS           47°C±1°C
	CASS                63°C±1°C
temperature&humidity  Control Accuracy	Test room temperature range: +0ºC~+85ºC			Relative humidity: 20%~98%RH(±3%)
	Saturated barrel temperature: 47ºC~70ºC			Temperature/humidity uniformity: ≤±2ºC  ≤±3%
	temperature resolution: 0.01 ºC			Humidity Resolution: 0.1% RH
	temperature fluctuation: ± 0.5 ºC			Humidity fluctuation: ± 2% RH
PH  value	NSS&ACSS:6.5~7.2 /  CASS:3.0~3.2
compressed air pressure	1.00±0.01kgf/cm2
salt fog settlement	1.0~2.0ml/80cm2/h (the average value after collecting 16 hours at least)
material	imported corrosion resisting,aging resistance, high strength  P.V.C  board
temperature controller	LCD  digital display multicolor touch screen temperature controller
spraying mode	continuous /  batch type spraying (optional)
Demist device	yes
safety device	over temperature protection,earth leakage protection,state caution light etc
Power Supply	AC220V1 φ15A             AC220V1 φ20A        AC220V1 φ30A
Design standards	ASTM B-117, ASTM B-268, B-268 IEC68-2-11 ISO 9227, 3768, 3769,3770
	JIS D-0201,H-8502,H-8610,K-5400,Z-2371   CNS 3627, 3885,4159,7669,8866;

Features:

*Automatic / manual water system has automatically add the water level of the water level is low, the test is not interrupted. Water level is insufficient warning to ensure that the use of safety.
 

*Precision glass nozzle (PYREX) made of special glass, mist spread evenly and naturally fall on the specimen, and 4000 hours of continuous use, and to ensure that no crystalline salt obstruction.
 

*Attached double over-temperature protection, over-temperature warning display, and cut off the heater power to ensure that the use of safety.
 

*Inlet temperature controller using a digital display, PID control, error of ± 0.1 ° C.

*Laboratory using direct steam heating, heating up fast, and even reduce the standby time, heating tubes with high corrosion-resistant titanium tubing.

*Spray tower attached to the conical dispersion, with oriented fog, the function of regulating the amount of fog and uniform loading amount of fog.

*The saturated air barrel using Henry's law, be heated humidification, and provide the required humidity of the laboratory. Its made of SUS # 304 stainless steel insulation effect, with visual connectivity and drainage switch, in order to visually saturated air the barrel water level and cleaning.

*With automatic defogging device that can clearly watch the specimen in test chamber.

*Fog sealing sink, water seal to prevent fogging leakage.

*Laboratory sealing cover material for Taiwan imported PVC board, pneumatic cylinder automatic lifting way, easy to operate safe and reliable.
 

*The import timer using digital display, accurate timekeeping, H. M. seconds S can be segmented set any required test time, adjust the time range from 0.01 seconds to 9999 hours. * Reagent supplement bottles hidden attached water level viewing window, easy to clean and should not be broken.
 

*Laboratory basket rack using plane indexing rack, can arbitrarily adjust the angle, four off the fog, and the fog direction completely consistent.


Corresponding Standard:

ASTM B-117,      ASTM B-268,  B-268      ASTM D1735      ASTM B117
ISO 9227, 3768, 3769,3770       IEC68-2-11       IEC 68-2-30 
IEC60068-2-1.1990        IEC60068-2-2.1974     EIA - 364-31C
IEC68-2-03                    EIA - 364-59                   K-5400,Z-2371
JIS D-0201  H-8502,H-8610  CNS 3627, 3885,4159,7669,8866

Product View of Temperature Humidity Compound Salt Spray chamber:

1. Are you Manufacturer?Do you offer after-sales service? How can I ask for that? And how about the warranty?

Yes, we are one of professional and biggest Manufacturer of Hot Sale Drying Oven For Laboratory,Hot

Air Circulating Oven,High Temperature Oven .Every machine from our factory has a 14-month warranty

after shipment. Generally,we offer 12 months for the FREE maintenance, while considering of sea

transportation,we can extend 2 months for our customers.

If your machine doesn't work, you can send E-mail to us and we will try our best to find

the problem by email or skype video chat if neccesary. After confirmation of the problem,

we can send you new spare parts or provide on-site repair.

2. What's the delivery term?

At most of time, we have stock in the factory. If there is no stock, normally, the delivery 

time is 15-20 working days after deposit receipt. If you are in urgent need, we can consider 

making a special arrangement for you.

3. Do you accept customization service? Can I have my logo on the machine?

Yes, of course. We can not only offer standard machines, but also customized 

machines according to your requirements. And we can also put your logo on the machine.

4. Do you have a branch company or service office in my country?

We have offices in the belowing:

The US Office: XIN BAO INSTRUMENT (US) CO.,LTD

Vietnam: XIN BAO INSTRUMENT INDUSTRY(VIETNAM)CO.,LTD

Address:248 no.1A Road,An Lac-Binh Tri Dong Residence,B Ward, Binh Tan Disrtict, HO Chi Minh City, Vietnam.

Singapore Dealer: Surveillance Inspection & Testing Services Pte Ltd

Address:No. 5 Jalan Kilang Barat #08-06 Petro Centre Singapore, 159349

Italy Dealer :AMSE SRL

Address: Strada della Cebrosa 86, 10156 Torino Italy

Suzhou Branch: XIN BAO INSTRUMENT SUZHOU BRANCH

Address: The First Garden B5 Buildings,Wuzhong Road 2588,Wuzhong District, Suzhou City Jiangsu Province

 Nanjing Branch: XIN BAO INSTRUMENT NANJING BRANCH

Address: Room 539, Excellence Building, 688 Zhujiang Road, Xuanwu District, Nanjing City, Jiangsu Province

Taizhou Branch: XIN BAO INSTRUMENT TAIZHOU BRANCH

Address: No.68, Gaoyuan District, Jiaojiang District, Taizhou City, Zhejiang Province

Taiwan : TAIWAN XIN BAO INSTRUMENT CO.,LTD

Address: No. 551-1, 4, Central Road, Taichung City, Taiwan

5. How to install and use the product?

We will send you operating instructions, English  video by Email. Or you can download on our

official website directly.

Most of our machine is shipped with a whole part, which means it is already installed, all you

need to do is to connect the power cable and start to use.  And if possible, we can also install

your machine at site.