Vacuum drying oven
| Inner Size (WHD) |
100*100*100cm |
External Size(WHD) |
135*180*170cm |
| Temp range |
RT 20ºC~200ºC Adjustable |
Precision rate |
Controlling: ±0.5ºC
Displays: 0.1ºC |
| Fluctuation |
<=5ºC
when it reaches to the set temp |
Deviation |
±6ºC
No load, no vacuum |
| Controller position |
Optional. Top or bottom of the machine |
Door opening method |
From the right to the left. |
| Sample shelves |
4 shelves, 30kg loading affordable of each. Distance can be adjusted. |
Seal material |
High temperature resistant silicone strip |
| Vacuum pump installation |
In the back of the machine |
Heat insulation |
Fiber stone wool
Thickness: 100mm |
| Inner material |
SUS#304 Stainless steel board
Thickness: 5.0mm |
External material |
cold-rolled plate with anti rust painting treatment.
Thickness: 1.2mm |
| Operation condition |
5ºC~35ºC; 35%~80% RH |
Bottom of the machine |
Adjustable casters with break |
II. Temperature controlling system
- Digital displays; Single point temperature control; Self calculation; PV/SV shows at the same time.
- Timer: 0~9999 h/m/s; The heating stops and alarm rings when the setting time's up.
- The temperature sensitivity type is K.
- Current controller: SSR (Solid State Relay)
- Heating method: heat radiation from three sides (left, right and the bottom of inner chamber)
- Heating components: Stainless steel, anti rust heating tube.
III. Seal and vacuum display
- All door are sealed with high density silicon sealers.
- Using Panasonic digital vacuum meter
- Sensor: Air pressure induction
- Vacuum range: 0.0KPa~100.0KPa (Relative 133Pa)
- Leakage ration: 1.0KPa/h
- Vacuum controlling: Self control and stops when it reaches to the upper limit;
- Vacuum electromagnetic valve:KF40 High vacuum differential pressure valve
- Vacuum connection: KF40 vacuum interface+ Stainless steel bellow
- Vacuum pump configuration: XD-63 oil type vacuum pump
IV. Overheat system
- Overheat system: When the temp reached to protection value, the heating stops automatically and keep the machine, sample safe.
- Circuit protection system: Phase-sequence protection, wire-grounding protection; Overload protection; Short-circuit protection.
V. Power
3Ø 380V 50Hz; 23A; 15kw
Application
Vacuum oven is designed specially for drying of material which is thermo-sensitive or decompounded and oxidative easily. It can be filled with inert gases, which is especially for a rapid drying of some compound material. It is used to determine ash content of material like Polymer, Polyethylene, Polyester, Nylon, Cork, or any other material.
Industrial electric furnace/laboratory muffle furnace features:
1. It has high-quality refractory materials and forming fiber module or lightweight ceramic.
2. Micro PID+SSR+ Timer, precise & reliable control
3. There are vents on rear wall, and it can be connected with fan or catalytic device.
4. It has grounding leakage circuit breakers, and can protect personal safety
Ø 24 hours online
Ø 35 years experiences
Ø Sample chamber of each model
Ø Best price, fast delivery
Ø OEM,ODM
Ø Oversea offices
Ø Own import and export business license
ØISO,CE,UL,ASTM,DIN,EN,GB,BS,JIS,ANSI,TAPPI,AATCC,IEC,VDE
Customer Support Services
Ø Installation
Ø Training (Training customer employees)
Ø Calibration
Ø Preventative maintenance
Ø Replacement parts
Ø Assistance via phone or internet
Ø On-site diagnosis and repair/online diagnosis and repair
Company Profile
Dongguan Xinbao Instrument Co., Ltd, with its own brand--OTS, has been dedicating in providing professional testing equipment with top quality since its establishment in 1978. It owns sophisticated and advanced technology in producing environmental test chambers and mechanical test machines like temp humidity chamber, thermal shock test chambers, rain and dust test chambers, salt spray chambers ,walk in /drive in test chambers, tensile testing machine, vibration test machine, other customized test chambers and so on. Products made by OTS reach international standards: ISO, ASTM, DIN, EN, GB, BS, JIS, AMSI, UL, TAPPI, AATCC, IEC. Also they are widely used in different area: R&D Institutions, Quality inspection institutions, universities,electronics, communications, instrumentation, automobile, plastic, metal, building materials, aviation, etc.
Now OTS has its main production base in Dongguan, a branch in Suzhou and offices in South Asia, Europe, USA. OTS also owns an independent laboratory which exhibits all currently produced machines under CNAS calibration, so customers can check the function and quality immediately. Equipped with over 30 workers in a metal plate department, OTS is capable to produce customized shells; What's more, OTS has enough stock to satisfy customers need in time. In the meanwhile, every machine must be examined for 3~days before shipment and with lifetime maintenance service.
1.Do you offer after-sales service? How can I ask for that? And how about the warranty?
Every machine from our factory has a 14-month warranty after shipment. Generally, we offer 12 months for the FREE maintenance, while considering of sea transportation, we can extend 2 months for our customers. If your machine doesn't work, you can send E-mail to us and we will try our best to find the problem by email or skype video chat if neccesary. After confirmation of the problem, we can send you new spare parts or provide on-site repair.
2.What's the delivery term?
At most of time, we have stock in the factory. If there is no stock, normally, the delivery time is 15-20 working days after deposit receipt. If you are in urgent need, we can consider making a special arrangement for you.
3.Do you accept customization service? Can I have my logo on the machine?
Yes, of course. We can not only offer standard machines, but also customized machines according to your requirements. And we can also put your logo on the machine.
4.How to install and use the product?
We will send you operating instructions, English video by Email. Or you can download on our officail website directly. Most of our machine is shipped with a whole part, which means it is already installed, all you need to do is to connect the power cable and start to use. And if possible, we can also install your machine at site.
If you want to know more information...
Please leave a message below and click " SEND "
Thanks for your time and attention~Thank you!
){kind=link}