Product Description:
Wood Flooring Scratch Abrasion Test and Martindale micro-scratch tester
Description :
Martindale Abrasion Tester, also known as Martindale Abrasion Tester, is suitable for testing the wear resistance of PVC floor, SPC floor, WPC floor and other floor covering materials (sample damage, quality loss, appearance change)
In accordance with EN 16094, ISO12947, ISO 12945, GB / T 4802, ASTM D4966 and other test standards
Working principle
Under the specified pressure, the wear resistance of the specimen was tested after the circular test was carried out with the locus of Lissajous figure for a certain number of times.
Specification
| Test station |
2heads |
| Direction |
Fron and back like below photo shows or the Jissajous direction as options |
| Procedure need to pay more attention |
To check the pattern without removing the Top Plate, "jog" the machine with a post-it on the base plate and the Martindale pen in the holder instead of the spindle to see if a back and forth motion is formed |
| Center the sample on the middle plate with the emboss perpendicular to the motion of the machine. |
| Test pressure weight |
Weight (8.4 lb) |
| controller |
PLC touch screen control |
| Volume (w * D * h) |
about 885×600×410mm |
| weight |
about 80kg |
| Power Supply |
1 phase 220 V 50hz |
| holding Plates |
Diameter of holding Plates should be 3 inch (76.2mm). |
Features
The machine adopts touch type display screen, easy to understand the interface and easy to operate; the microcomputer system adopts two counting methods, which are intuitive and easy to set. Four working positions are tested at the same time to improve the test efficiency
★The scientific structure design makes it easy to load and unload samples without moving the cover plate;
★The use of frequency conversion motor makes the instrument run more smoothly;
★A variety of test modes can be selected, and the pilling and wear-resistant functions can be done at the same time, and the national standard and American Standard can be implemented;
★With optional menu interface in both Chinese and English to meet different user needs (customized);
★It adopts imported touch screen control, the interface is clear and easy to understand, and the operation is intuitive and convenient;
★The 4-station face-to-face design is adopted, which is easy to operate and intuitive;
★There are two working modes of minus counting and adding counting, with half-way continuous adding and cumulative counting. The four stations can be counted separately, which is convenient for users to test.
Ø 24 hours online
Ø 35 years experiences
Ø Sample chamber of each model
Ø Best price, fast delivery
Ø OEM,ODM
Ø Oversea offices
Ø Own import and export business license
ØISO,CE,UL,ASTM,DIN,EN,GB,BS,JIS,ANSI,TAPPI,AATCC,IEC,VDE
Customer Support Services
Ø Installation
Ø Training (Training customer employees)
Ø Calibration
Ø Preventative maintenance
Ø Replacement parts
Ø Assistance via phone or internet
Ø On-site diagnosis and repair/online diagnosis and repair
Company Profile
Dongguan Xinbao Instrument Co., Ltd, with its own brand--OTS, has been dedicating in providing professional testing equipment with top quality since its establishment in 1978. It owns sophisticated and advanced technology in producing environmental test chambers and mechanical test machines like temp humidity chamber, thermal shock test chambers, rain and dust test chambers, salt spray chambers ,walk in /drive in test chambers, tensile testing machine, vibration test machine, other customized test chambers and so on. Products made by OTS reach international standards: ISO, ASTM, DIN, EN, GB, BS, JIS, AMSI, UL, TAPPI, AATCC, IEC. Also they are widely used in different area: R&D Institutions, Quality inspection institutions, universities,electronics, communications, instrumentation, automobile, plastic, metal, building materials, aviation, etc.
Now OTS has its main production base in Dongguan, a branch in Suzhou and offices in South Asia, Europe, USA. OTS also owns an independent laboratory which exhibits all currently produced machines under CNAS calibration, so customers can check the function and quality immediately. Equipped with over 30 workers in a metal plate department, OTS is capable to produce customized shells; What's more, OTS has enough stock to satisfy customers need in time. In the meanwhile, every machine must be examined for 3~days before shipment and with lifetime maintenance service.
1.Do you offer after-sales service? How can I ask for that? And how about the warranty?
Every machine from our factory has a 14-month warranty after shipment. Generally, we offer 12 months for the FREE maintenance, while considering of sea transportation, we can extend 2 months for our customers. If your machine doesn't work, you can send E-mail to us and we will try our best to find the problem by email or skype video chat if neccesary. After confirmation of the problem, we can send you new spare parts or provide on-site repair.
2.What's the delivery term?
At most of time, we have stock in the factory. If there is no stock, normally, the delivery time is 15-20 working days after deposit receipt. If you are in urgent need, we can consider making a special arrangement for you.
3.Do you accept customization service? Can I have my logo on the machine?
Yes, of course. We can not only offer standard machines, but also customized machines according to your requirements. And we can also put your logo on the machine.
4.How to install and use the product?
We will send you operating instructions, English video by Email. Or you can download on our officail website directly. Most of our machine is shipped with a whole part, which means it is already installed, all you need to do is to connect the power cable and start to use. And if possible, we can also install your machine at site.
If you want to know more information...
Please leave a message below and click " SEND "
Thanks for your time and attention~Thank you!
){kind=link}