Programmable Thermostatic Constant Humidity Climatic Thermal Cycle Test Chamber

• Certification: CE, ISO
• Temp. Deviation: +/- 0.5 Degree C
• Controller: Programmable LCD Touch Screen
• Compressor: Original France Tecumseh
• Waterway Device and Circuit Devices: Separated
• Temp.Fluctuation: +/-3.0 Degree C
• Model NO.: XB-OTS-800
• Body Materials: SUS#304 Stainless Steel
• Quality: Certificated
• Cable Port: External Power
• Product Name: Environmental Test Chamber
• Temp. Range: -70 Degree C~+100 Degree C
• Transport Package: Strong Wood Case for Climatic Chamber
• Specification: (W*H*D)100*100*80CM
• Trademark: OTS
• Origin: Guangdong, China (Mainland)
• HS Code: 8479899990
• Production Capacity: 300 Pieces/Month

Product Description

High Technology Environmental Fast Temperature Humidity Change Rate Test Chamber
 

Introduction:

Rapid Rate Change Temperature Test Chamber is widely applied for quality inspection for all types of electric products, electric appliance, and products from communication, instrument, automobile, plastic, metal, food, chemical, building materials, medical and aerospace industries by constant high low temperature change, damp heat etc environment simulation reliability test.

Specification:

	XB-OTS-80	XB-OTS-150	XB-OTS-225	XB-OTS-408	XB-OTS-800	XB-OTS-1000
Inner size W*H*DCM	40*50*40	50*60*50	50*75*60	60*85*80	100*100*800	100*100*100
External size W*H*DCM	90*143*100	100*153*110	110*168*110	130*178*120	150*193*140	150*193*160
Temperature range	-70°C~+150°C(180°C) (A:-20°C B:-40°C C:-60°C D:-70°C )
Humidity range	20%~98%R.H.(10%-98%R.H/5%~98%R.H)
Temp humidity analytic accuracy / uniformity	±0.1°C;±0.1%R.H./ ±1.0°C;±3.0%R.H.is special optional condition.
Temperature  humidity control accuracy/fluctuation	±1.0°C;±2.0%R.H./ ±0.5°C;±2.0%R.H.
Heat/cooling time	About 5.0°C/min;about 1.2°C/min (5~20°C/min is a special optional condition)
Inner and outer materials	SUS#304 Stainless steel for inner chamber and Carton Advanced cold plate nano paint for outer.
Insulation materials	Resistant to high temp ,high density,formate chlorine,ethyl acetum foam insulation materials
Cooling system	Air cooling/single segment compressor(-20°C) ,air and water double segment compressor (-40°C~-70°C)
Protection devices	Fuse switch, compressor overload switch, refrigerant high and low pressure protection switch, super humidity over-temperature protection switch, fuse, failure warning system
Parts	Watching window,50mm testing hole,PL internal bulbs,partition plate,dry and wet ball gauze
Controller	TEMI" South Korea"TEMI" "OYO" Japan's "OYO" Brand  optional
Compressor	Original France"Tecumseh"brand
Power	1Φ 220VAC±10% 50/60Hz & 3Φ 380VAC±10% 50/60Hz

Features:
1.Reasonable structural design, rapid cooling rate.
2. Imported refrigeration system, internal with SUS#304 high temperature resistant stainless steel.
3. More than 30% energy saving is achieved.
4. The test specimen can be easily observed via observation window,
5. Easy to Operate, install and maintain.
6.ational Construction and fast cooling rate
7.Frequency conversion control of wind speed.
8.Adopts international brand of imported parts for cooling system to improve operation reliability 
9.Touch screen controller, friendly Man-Machine interface and safety device to ensure simple operation and easy maintenance.
10.Standards Implemented and met
11.GB10592-89 Technical requirements for high and low temperature test chamber
12.GB2423.1-1989 Low temperature test
13.GB2423.2-1989 High temperature test mode

Standard:

GB/Bb T2423.2-89 high temperature test method              GB2423.1-89 test A: low temperature test method 6

Ab IEC60068-2-1 low temperature test method                  GJB150.4-1986 test at low temperature

EIA - 364-59 test at low temperature                                   IEC60068-2-38 temperature cycle

IEC60068-2-78 constant   temperature                               IEC60068-2-30   temperature cycle

EIA - 364-31C temp resistance                                           GB/T2423.3 constant  heat test method
The production process of the test chambers :

Our Services:

We are here to help you. Services available:

Replacement manuals

• Consumables and replacement parts
• On-site maintenance and repair
• Warranty support
• Over-the-phone service support and advice

If you have an OTS chamber  , we will do our best to help you in whatever way we can.  

 Manuals: PDF files of manuals for current models are available free. Please contact us to request a copy. Older and printed copies at additional charge.

• Service repair:  We prefer you contact us direct at the factory with any problems you may be experiencing.  We help diagnose the problem, arrange for any needed parts, and schedule a technician to do the repairs.  Rarely can a local contractor get all that done for you as quickly as we can.  We also guarantee the work .
• 

Our Company

 

FAQ:

Q1 :  Can you customize the product?

   A:   Yes, we can customize any products according to requirements.Hot selling lab electronic temperature humidity cabinet/Environmental climate test chamber also can be customized. 

Q2 :  How to choose the most suitable products? 

  A:   Our professional team will give you the best suggestion,just be  patiently to tell us the information about the parameters your required.

 Q3 :  Can you arrange installations and commissioning in our lab?

   A:   Firstly, for standard chamber we had 3-5 days commissioning before shipping , you just need link power in your lab, then can start to operate

        Secondly; we had detailed operation manual with chamber , any problems you can find and solve in it

           Thirdly, some of customized chambers we should to install and teach your team to operate .
 

If you want to know more information,

 please leave a message below. Thank you~