100V 100A 4 Channel Lithium Ion Battery Tester Equipment

Product Description

Product Description

Product Description

This is a high-precision and high-performance battery tester. Set parameters in the computer software to charge and discharge various batteries for testing battery capacity/voltage/current, and can do battery cycle testing. Traditional linear equipment, high precision (1000-1000 precision of the default range, can be 10000-50000 precision), stable performance. Single-point control, using constant current source and constant voltage source double closed-loop control. It is convenient and flexible to connect with the computer through Ethernet, and more devices can be added at any time through the switch.

Product Paramenters

Parameter	Specification
Model	XB-OTS-100V100A
Channels per Cabinet	4
Maximum Power per Cabinet	40KW
System Functions	1.Battery cycle life test 2.Battery capacity test 3.Battery charge/discharge characteristic test 4.Battery charge retention capability test 5.Battery charge/discharge efficiency test 6.Battery overcharge/overdischarge rate withstand capability test
AC Input Interface	1. Input: 3-phase 5-wire AC380V±15% 2. Input Current: 61A, recommended 80A-3P circuit breaker 3. Frequency: 50Hz 4. THDi ≤ 3% 5. Power Factor > 0.99 (rated power) 6. Charging Efficiency ≤ 85%, Discharging Efficiency ≤ 83% (whole unit) 7. Bus regeneration efficiency ≥ 93%
Voltage Accuracy	±0.05% of F.S. ±0.05% of R.D.
Current Accuracy	±0.05% of F.S. ±0.05% of R.D.
Power Accuracy	±0.05% of F.S. ±0.05% of R.D.
Current Response Time	Hardware current response time: ≤ 20ms
Time Setting Range	1000 minutes/step
Voltage/Current Detection	4-wire (Kelvin) connection
Data Recording Frequency	≥ 1000 ms
Output DC Voltage Resolution	1 mV
Minimum Output Current	50 mA
Minimum Discharge Voltage	8 V (equipment terminal voltage)
Output DC Current Resolution	1 mA
Data Export Format	Data can be exported to EXCEL, chart files. Provides analysis curves and data lists for charge/discharge curves, capacity fade rate, cycle life curves, charge/discharge voltage, current, capacity-time, etc.
Data Saving Method	Users can define file names and data save paths. Data is saved as files.
Main Channel Operating Modes	Charging: Constant Current (CC), Constant Voltage (CV), Constant Current Constant Voltage (CCCV) Discharging:Constant Current Discharge (CD), Constant Current Constant Voltage Discharge (CVD)
Communication Method	LAN (TCP/IP)
Test Data Recorded	Voltage, Current, Time, Capacity, Energy
Input Protection	Overvoltage, Overcurrent, Phase Loss, Overtemperature, Protection Alarm, Anti-Islanding Protection.
Output Protection	Overvoltage, Overcurrent, Short Circuit, Reverse Polarity, Capacity, Temperature. No output if battery voltage is not detected.
Software Protection	Power failure data protection, Power restoration continuation, Overvoltage/Overdischarge protection, Overcurrent/Undercurrent protection, Capacity protection, Overtemperature protection, Abnormal voltage trend protection, Abnormal current trend protection, Abnormal current fluctuation protection, Abnormal voltage fluctuation protection, Abnormal charging voltage rise speed protection, Abnormal discharge current drop speed protection.
Maximum Cycle Count	10,000 times
Cooling Method	Forced Air Cooling
Dimensions (WDH)	650 * 600 * 1200 mm
Operating Temperature	-20℃ ~ 50℃
Humidity	10-90% RH (non-condensing)

 Test Software Interface (Descriptive Translation)

Each channel can be controlled independently, and its operational workflow can be edited separately. Users can quickly identify the current status of each channel by observing the background color displayed on the host interface.

Users can customize the X- and Y-axis parameters for data comparison and analysis, and the system supports the simultaneous display of up to 4 data curves.

Once curve content has been selected, users can configure a specific color for each curve within the list. The curve display area supports unrestricted zooming and panning operations. Double-clicking any data point within the data table will locate and highlight the corresponding point on the curve.

Advantage

Customer Support Services

Ø 24 hours online
Ø 35 years experiences
Ø Sample chamber of each model
Ø Best price, fast delivery
Ø OEM,ODM
Ø Oversea offices
Ø Own import and export business license
ØISO,CE,UL,ASTM,DIN,EN,GB,BS,JIS,ANSI,TAPPI,AATCC,IEC,VDE

Ø Installation
Ø Training (Training customer employees)
Ø Calibration
Ø Preventative maintenance
Ø Replacement parts
Ø Assistance via phone or internet
Ø On-site diagnosis and repair/online diagnosis and repair

Details Images

Product packaging

Company Profile