2-zones high-low temperature thermal shock impact test equipment
Applicable Industries:
Programmable High Low Temperature Shock Impact Test Equipment used to test the material structure or composite material in an instant by the extremely high temperatures and very low temperature continuous environment which can endure the degree of order in the shortest possible time to test its thermal expansion and contraction caused by chemical changes physical harm.
The applicable the object material, including metals, plastics, rubber, electronic, ..., etc., can be used as the basis of its product improvement or reference.
Purpose: |
thermal shock test chamber makes it possible to quickly and autonomously transfer test items back and forth repeatedly between a hot and cold environment. Thermal shock testing is different from thermal cycling, the latter being a longer and slower process. To see a more in depth look at thermal shock versus thermal cycling.
|
Inner size selection
Model |
XB-OTS-50 |
XB-OTS-80 |
XB-OTS-150 |
XB-OTS-225 |
XB-OTS-408 |
| Inner size WxHxD(cm) |
36×40×35 |
40×50×40 |
50×60×50 |
60×75×50 |
80×85×60 |
| External size WxHxD(cm) |
138x180x155 |
150X190X160 |
190x200X195 |
210x220X205 |
225x250x220 |
Detail Specification
Shock Temperature ragne |
-65°C~150°C |
| Heating up time |
RT~200°C about 35min |
| Cooling down time |
RT~-70°C about 90min |
| Temp recover time/change time |
≤5min / ≤10sec |
| Temp control accuracy/ |
±0.5°C / ±2.0°C |
| distribution accuracy |
| Inner materials |
SUS 304# stainless steel plate for inner chamber,and stainless steel plate |
| + spray painting for external chamber. |
| Insulation materials |
High-temperature high-density amino acid ethyl ester foam insulator material. |
| Systems |
P.I.D+S.S.R+Microcomputer balanced temperature control system. |
| Cooling systems |
Semi-hermetic two-stage compressor (water-cooled) / |
| hermetic two-stage compressor (air-cooled). |
| Safety devices |
Fuse switch, high and low pressure protection switch compressors, |
| refrigerant pressure protection switch failure warning system, electronic siren. |
| Fitting |
Outlook window (special purchase), the upper and lower adjustable |
| compartment two energized measured line hole, casters,level bracket. |
| Power |
3 phase AC380V 50HZ/60HZ |
| Controller |
Tanwan TATO or TH900C |
| Compressor |
Germany Bitzer Brand |
Corresponding Standard:
GB11158 GB10589-89 GB10592-89 GB/T10586-89 GB/T2423.22-2001 GB/T2423.1-2001 GB/T2423.2-2001 GB/T2423.3-93 GB/T2423.4-93 ASTM D1735 EIA - 364-59
IEC60068-2-1.1990 IEC60068-2-2.1974 IEC 68-2-30 IEC68-2-03 EIA - 364-31C
Ø 24 hours online
Ø 35 years experiences
Ø Sample chamber of each model
Ø Best price, fast delivery
Ø OEM,ODM
Ø Oversea offices
Ø Own import and export business license
ØISO,CE,UL,ASTM,DIN,EN,GB,BS,JIS,ANSI,TAPPI,AATCC,IEC,VDE
Customer Support Services
Ø Installation
Ø Training (Training customer employees)
Ø Calibration
Ø Preventative maintenance
Ø Replacement parts
Ø Assistance via phone or internet
Ø On-site diagnosis and repair/online diagnosis and repair
Company Profile
Dongguan Xinbao Instrument Co., Ltd, with its own brand--OTS, has been dedicating in providing professional testing equipment with top quality since its establishment in 1978. It owns sophisticated and advanced technology in producing environmental test chambers and mechanical test machines like temp humidity chamber, thermal shock test chambers, rain and dust test chambers, salt spray chambers ,walk in /drive in test chambers, tensile testing machine, vibration test machine, other customized test chambers and so on. Products made by OTS reach international standards: ISO, ASTM, DIN, EN, GB, BS, JIS, AMSI, UL, TAPPI, AATCC, IEC. Also they are widely used in different area: R&D Institutions, Quality inspection institutions, universities,electronics, communications, instrumentation, automobile, plastic, metal, building materials, aviation, etc.
Now OTS has its main production base in Dongguan, a branch in Suzhou and offices in South Asia, Europe, USA. OTS also owns an independent laboratory which exhibits all currently produced machines under CNAS calibration, so customers can check the function and quality immediately. Equipped with over 30 workers in a metal plate department, OTS is capable to produce customized shells; What's more, OTS has enough stock to satisfy customers need in time. In the meanwhile, every machine must be examined for 3~days before shipment and with lifetime maintenance service.
1.Do you offer after-sales service? How can I ask for that? And how about the warranty?
Every machine from our factory has a 14-month warranty after shipment. Generally, we offer 12 months for the FREE maintenance, while considering of sea transportation, we can extend 2 months for our customers. If your machine doesn't work, you can send E-mail to us and we will try our best to find the problem by email or skype video chat if neccesary. After confirmation of the problem, we can send you new spare parts or provide on-site repair.
2.What's the delivery term?
At most of time, we have stock in the factory. If there is no stock, normally, the delivery time is 15-20 working days after deposit receipt. If you are in urgent need, we can consider making a special arrangement for you.
3.Do you accept customization service? Can I have my logo on the machine?
Yes, of course. We can not only offer standard machines, but also customized machines according to your requirements. And we can also put your logo on the machine.
4.How to install and use the product?
We will send you operating instructions, English video by Email. Or you can download on our officail website directly. Most of our machine is shipped with a whole part, which means it is already installed, all you need to do is to connect the power cable and start to use. And if possible, we can also install your machine at site.
If you want to know more information...
Please leave a message below and click " SEND "
Thanks for your time and attention~Thank you!
){kind=link}