ISO 23999 Dimensional Stability And Curling Test Chamber
ISO 23999:2008 DIN EN ISO 23999:2012 BS EN 434:1994 Dimensional Stability And Curling Test Chamber is used for Resilient floor coverings,such as bamboo flooring,cork flooring,general flooring, hardwood flooring, laminate flooring,resilient flooring ,to determine the dimensional stability and curling after exposure to heat;
The traditional test method relies on the manual use of a micrometer to measure the dimensional deformation of the Resilient floor coverings after being heated. However, Dongguan Xinbao Instrument Co., Ltd. invented an automatic online measurement using an electronic sensor with a temperature and humidity test chamber to automatically save test data. , not only greatly improved the test efficiency but also greatly improved the accuracy of the test. You can checking the following technical parameters of ISO 23999:2008 DIN EN ISO 23999:2012 BS EN 434:1994 Dimensional Stability And Curling Test Chamber
Dimension:
| Capacity |
XB-OTS-408L |
| Interior Dimension W×H×D(cm) |
85*80*60cm |
| Capacity |
XB-OTS-648L |
| Interior Dimension W×H×D(cm) |
180*60*60 |
3. Temperature & Humidity Range:
| Temperature Range |
-20ºC ~ +150ºC,can be set |
| Humidity Range |
20% ~ 98%, can be set |
4. Heating & Cooling Time:
| Heating Time |
RT>+150ºC, it needs 35 minutes
(Non-Linear load needs about 3.5ºC / min) |
| Cooling Time |
RT>-20ºC, it needs20 minutes
(Non-Linear load needs about 1.2ºC / min) |
5. Accuracy:
| Temperature and humidity Analytical accuracy / uniformity |
±0.1ºC;±0.1%R.H./1.0ºC;±3.0%R.H. |
| Temperature and humidity control accuracy / volatility |
±1.0ºC;±2.0%R.H./0.5ºC;±2.0%R.H. |
6. Dimensional Stability And Curling Test
| Dimensional measurement accuracy: |
0.1% FS |
| Resolution: |
1um |
| Sensor: |
4 groups (can be monitored for the deformation of the sample in 4 directions) |
| Sample test stand: |
1 set |
| Control mode: |
PLC touch screen control and display |
| PLC touch screen function: |
can control: time, temperature, humidity; display and full record: time, temperature, humidity, size change value and corresponding curve |
Corresponding Standard:
ISO 23999:2008 DIN EN ISO 23999:2012 BS EN 434:1994 and other standards.
It's the chamber used for Resilient floor coverings Dimensional Stability And Curling Test ,such as bamboo flooring,cork flooring,general flooring, hardwood flooring, laminate flooring,resilient flooring ,to determine the dimensional stability and curling after exposure to heat.
Principle:
The machine adopts the high stability of the platinum resistance thermometer PT-100 body, LCD Touch English / touch -screen display, with multiple sets of PID control function, with USB standard communication interface, can connect computer interface control is implemented far side control, more concise and understandable with high accuracy, intelligent control system programming and setting control systems, to provide a full range experimenter optimal test performance.
Ø 24 hours online
Ø 35 years experiences
Ø Sample chamber of each model
Ø Best price, fast delivery
Ø OEM,ODM
Ø Oversea offices
Ø Own import and export business license
ØISO,CE,UL,ASTM,DIN,EN,GB,BS,JIS,ANSI,TAPPI,AATCC,IEC,VDE
Customer Support Services
Ø Installation
Ø Training (Training customer employees)
Ø Calibration
Ø Preventative maintenance
Ø Replacement parts
Ø Assistance via phone or internet
Ø On-site diagnosis and repair/online diagnosis and repair
Company Profile
Dongguan Xinbao Instrument Co., Ltd, with its own brand--OTS, has been dedicating in providing professional testing equipment with top quality since its establishment in 1978. It owns sophisticated and advanced technology in producing environmental test chambers and mechanical test machines like temp humidity chamber, thermal shock test chambers, rain and dust test chambers, salt spray chambers ,walk in /drive in test chambers, tensile testing machine, vibration test machine, other customized test chambers and so on. Products made by OTS reach international standards: ISO, ASTM, DIN, EN, GB, BS, JIS, AMSI, UL, TAPPI, AATCC, IEC. Also they are widely used in different area: R&D Institutions, Quality inspection institutions, universities,electronics, communications, instrumentation, automobile, plastic, metal, building materials, aviation, etc.
Now OTS has its main production base in Dongguan, a branch in Suzhou and offices in South Asia, Europe, USA. OTS also owns an independent laboratory which exhibits all currently produced machines under CNAS calibration, so customers can check the function and quality immediately. Equipped with over 30 workers in a metal plate department, OTS is capable to produce customized shells; What's more, OTS has enough stock to satisfy customers need in time. In the meanwhile, every machine must be examined for 3~days before shipment and with lifetime maintenance service.
1.Do you offer after-sales service? How can I ask for that? And how about the warranty?
Every machine from our factory has a 14-month warranty after shipment. Generally, we offer 12 months for the FREE maintenance, while considering of sea transportation, we can extend 2 months for our customers. If your machine doesn't work, you can send E-mail to us and we will try our best to find the problem by email or skype video chat if neccesary. After confirmation of the problem, we can send you new spare parts or provide on-site repair.
2.What's the delivery term?
At most of time, we have stock in the factory. If there is no stock, normally, the delivery time is 15-20 working days after deposit receipt. If you are in urgent need, we can consider making a special arrangement for you.
3.Do you accept customization service? Can I have my logo on the machine?
Yes, of course. We can not only offer standard machines, but also customized machines according to your requirements. And we can also put your logo on the machine.
4.How to install and use the product?
We will send you operating instructions, English video by Email. Or you can download on our officail website directly. Most of our machine is shipped with a whole part, which means it is already installed, all you need to do is to connect the power cable and start to use. And if possible, we can also install your machine at site.
If you want to know more information...
Please leave a message below and click " SEND "
Thanks for your time and attention~Thank you!
Audited Supplier 
){kind=link}
){kind=link}