| Customization: | Available |
|---|---|
| Power Supply: | 220V |
| Certification: | CE, TUV, ISO |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Applicable Industries:
Composite Salt spray chamber is applicable for various kinds material's surface treatment with temperature humidity and salt water spray, such as after coating, electroplate, inorganic and organic membrane dermal, negative pole with antirust oil treatment etc anti-corrosive treatment to test the corrosion-resistance of the product.
Can also be used to external lighting and signal device and vehicle lamps shell protection. Walk in type salt spray test chamber is available for us.
Specifications:
A. test chamber outside the box are made of CPVC polyethylene plates, thickness 10mm.
B. laboratory closures with PVC polyethylene board, thickness 5mm/8mm
C. Supplementary reagent bottle with PVC polyethylene board, hidden water table attached
D. humidification fill the tank with PVC polyethylene board, hidden water table attached
E. pressure air tank with SUS304 # stainless steel high pressure barrel insulation best
F. tune greenhouse: SUS304 # stainless steel box with inner and outer box with PVC polyethylene board
G. Insulation material: polyurethane rigid foam plastic
H. automatic lift by cylinder closures
I. adopts SUS304 # stainless steel bottom chassis and removable casters and positioning foot cups
J. transparent viewing window, combined with defogging device, easy to be clearly observed during the test to the test
K. specially designed sealed damper can be switched automatically or temperature and humidity, salt spray test
| Model | XB-OTS-90 | XB-OTS-120 | XB-OTS-160 | XB-OTS-200 | |
| Interior Test Chamber Dimension(cm)(L×W×H) |
90×50×60 | 120×80×50 | 160×100×50 | 200×100×50 | |
| Exterior Test Chamber Dimension (cm)(L×W×H) |
141*145*140 | 190*165*140 | 200*190*140 | 240*220*150 | |
| Capacity of the chamber(L) | 270L | 480L | 800L | 1440L | |
| Capacity of the salt water tank (L) |
25L | 40L | |||
| Power | AC 220V 50HZ | AC 380V 50HZ | |||
| temperature&humidity of the operating environment |
+5°C~ +35°C / <85%RH | ||||
| air pressure | 86~ 106Kpa | ||||
| Lab. temperature | NSS ACSS 35°C±1°C | ||||
| CASS 50°C±1°C | |||||
| Pressure barrel temperature | NSS ACSS 47°C±1°C | ||||
| CASS 63°C±1°C | |||||
| temperature&humidity Control Accuracy |
Test room temperature range: +0ºC~+85ºC | Relative humidity: 20%~98%RH(±3%) | |||
| Saturated barrel temperature: 47ºC~70ºC | Temperature/humidity uniformity: ≤±2ºC ≤±3% | ||||
| temperature resolution: 0.01 ºC | Humidity Resolution: 0.1% RH | ||||
| temperature fluctuation: ± 0.5 ºC | Humidity fluctuation: ± 2% RH | ||||
| PH value | NSS&ACSS:6.5~7.2 / CASS:3.0~3.2 | ||||
| compressed air pressure | 1.00±0.01kgf/cm2 | ||||
| salt fog settlement | 1.0~2.0ml/80cm2/h (the average value after collecting 16 hours at least) | ||||
| material | imported corrosion resisting,aging resistance, high strength P.V.C board | ||||
| temperature controller | LCD digital display multicolor touch screen temperature controller | ||||
| spraying mode | continuous / batch type spraying (optional) | ||||
| Demist device | yes | ||||
| safety device | over temperature protection,earth leakage protection,state caution light etc | ||||
| Power Supply | AC220V1 φ15A AC220V1 φ20A AC220V1 φ30A | ||||
| Design standards | ASTM B-117, ASTM B-268, B-268 IEC68-2-11 ISO 9227, 3768, 3769,3770 | ||||
| JIS D-0201,H-8502,H-8610,K-5400,Z-2371 CNS 3627, 3885,4159,7669,8866; | |||||
Features:
*Automatic / manual water system has automatically add the water level of the water level is low, the test is not interrupted. Water level is insufficient warning to ensure that the use of safety.
*Precision glass nozzle (PYREX) made of special glass, mist spread evenly and naturally fall on the specimen, and 4000 hours of continuous use, and to ensure that no crystalline salt obstruction.
*Attached double over-temperature protection, over-temperature warning display, and cut off the heater power to ensure that the use of safety.
*Inlet temperature controller using a digital display, PID control, error of ± 0.1 ° C.
*Laboratory using direct steam heating, heating up fast, and even reduce the standby time, heating tubes with high corrosion-resistant titanium tubing.
*Spray tower attached to the conical dispersion, with oriented fog, the function of regulating the amount of fog and uniform loading amount of fog.
*The saturated air barrel using Henry's law, be heated humidification, and provide the required humidity of the laboratory. Its made of SUS # 304 stainless steel insulation effect, with visual connectivity and drainage switch, in order to visually saturated air the barrel water level and cleaning.
*With automatic defogging device that can clearly watch the specimen in test chamber.
*Fog sealing sink, water seal to prevent fogging leakage.
*Laboratory sealing cover material for Taiwan imported PVC board, pneumatic cylinder automatic lifting way, easy to operate safe and reliable.
*The import timer using digital display, accurate timekeeping, H. M. seconds S can be segmented set any required test time, adjust the time range from 0.01 seconds to 9999 hours. * Reagent supplement bottles hidden attached water level viewing window, easy to clean and should not be broken.
*Laboratory basket rack using plane indexing rack, can arbitrarily adjust the angle, four off the fog, and the fog direction completely consistent.
Corresponding Standard:
ASTM B-117, ASTM B-268, B-268 ASTM D1735 ASTM B117
ISO 9227, 3768, 3769,3770 IEC68-2-11 IEC 68-2-30
IEC60068-2-1.1990 IEC60068-2-2.1974 EIA - 364-31C
IEC68-2-03 EIA - 364-59 K-5400,Z-2371
JIS D-0201 H-8502,H-8610 CNS 3627, 3885,4159,7669,8866
Product View of Temperature Humidity Compound Salt Spray chamber:
1. Are you Manufacturer?Do you offer after-sales service? How can I ask for that? And how about the warranty?
Yes, we are one of professional and biggest Manufacturer of Hot Sale Drying Oven For Laboratory,Hot
Air Circulating Oven,High Temperature Oven .Every machine from our factory has a 14-month warranty
after shipment. Generally,we offer 12 months for the FREE maintenance, while considering of sea
transportation,we can extend 2 months for our customers.
If your machine doesn't work, you can send E-mail to us and we will try our best to find
the problem by email or skype video chat if neccesary. After confirmation of the problem,
we can send you new spare parts or provide on-site repair.
2. What's the delivery term?
At most of time, we have stock in the factory. If there is no stock, normally, the delivery
time is 15-20 working days after deposit receipt. If you are in urgent need, we can consider
making a special arrangement for you.
3. Do you accept customization service? Can I have my logo on the machine?
Yes, of course. We can not only offer standard machines, but also customized
machines according to your requirements. And we can also put your logo on the machine.
4. Do you have a branch company or service office in my country?
We have offices in the belowing:
The US Office: XIN BAO INSTRUMENT (US) CO.,LTD
Vietnam: XIN BAO INSTRUMENT INDUSTRY(VIETNAM)CO.,LTD
Address:248 no.1A Road,An Lac-Binh Tri Dong Residence,B Ward, Binh Tan Disrtict, HO Chi Minh City, Vietnam.
Singapore Dealer: Surveillance Inspection & Testing Services Pte Ltd
Address:No. 5 Jalan Kilang Barat #08-06 Petro Centre Singapore, 159349
Italy Dealer :AMSE SRL
Address: Strada della Cebrosa 86, 10156 Torino Italy
Suzhou Branch: XIN BAO INSTRUMENT SUZHOU BRANCH
Address: The First Garden B5 Buildings,Wuzhong Road 2588,Wuzhong District, Suzhou City Jiangsu Province
Nanjing Branch: XIN BAO INSTRUMENT NANJING BRANCH
Address: Room 539, Excellence Building, 688 Zhujiang Road, Xuanwu District, Nanjing City, Jiangsu Province
Taizhou Branch: XIN BAO INSTRUMENT TAIZHOU BRANCH
Address: No.68, Gaoyuan District, Jiaojiang District, Taizhou City, Zhejiang Province
Taiwan : TAIWAN XIN BAO INSTRUMENT CO.,LTD
Address: No. 551-1, 4, Central Road, Taichung City, Taiwan
5. How to install and use the product?
We will send you operating instructions, English video by Email. Or you can download on our
official website directly.
Most of our machine is shipped with a whole part, which means it is already installed, all you
need to do is to connect the power cable and start to use. And if possible, we can also install
your machine at site.
){kind=link}